An Overview Of Core Drilling Methods And Its Application

There are two main areas or surfaces where the input of a core drilling machines in needed. The two main types of surfaces encountered during major concrete works are the reinforced and non-reinforced surfaces. These two surfaces are drilled differently considering that they have different surface or structural properties. For instance, the amount of pressure needed to drill past a steel bar is different from the one required to drill concrete. Use of the wrong Cement Core Drills might only end up destroying the drill bit or wasting your valuable time. Therefore, it is important to ensure you have a core drilling machine that is equal to the task at hand.

What is Core Drilling?asdsFdvSDcAS

Core drilling is a method used to drill past different type of concrete structures. It is one of the best methods to use when drilling a hole. Unlike other methods, it does this without causing too much damage to the surface. The core drill is the machine responsible for digging past concrete structures. The main types of drill bits used for these types of jobs are made from steel or diamond. Diamond is highly preferred when you want a neat finish or precise cutting. Unlike traditional drilling methods, diamond drilling is also comprehensive and environmentally sound.

Diamond core drilling

When looking at core drilling methods, diamond drilling is considered to be a superior drilling technique. The decision to choose diamond over other drilling methods is justified by a number of benefits associated with diamond drilling. Some of the benefits include:

  • Gives precise cuttings
  • Can be used on both reinforced and non-reinforced concrete
  • Can be used in exploration drilling – drilling hard rocks
  • Produces less vibrations
  • Cost effective

Surfaces where core drilling methods are used

Reinforced concrete

dADcAASDADSAs expected, drilling through reinforced concrete is challenging and takes long. This explains why core drilling methods that used diamond are adopted in this procedure. However, it also puts the drill under a lot of stress. Moreover, since reinforced concrete are considered to be a special type of composite material, the diamond bit experiences varying forces due to the different material properties.

Pure concrete

Drilling concrete is relatively different from drilling reinforced concrete. As such, with a core drilling machine, it is fairly easy to drill holes with large diameters. Drilling is achieved by subjecting concrete to yielding pressures. As such, the drilling mechanism depends on crack propagation caused by the pressure. This creates a way for the core bit to find its way into the concrete.

How To Be A Heavy Equipment Operator

Heavy equipment operators are people who are trained to operate different types of heavy equipment like dozers, graders, loaders, excavators, and backhoes. Heavy equipment is normally used in oil and gas pipelines, road construction and maintenance sites, building constructions sites, quarries and mining sites among others. To become a heavy equipment operator, one requires a special set of skills which are required to handle heavy equipment successfully. There are a few ways you can go about getting these skills. Below are some tips on how to be a heavy equipment operator.

A Heavy Equipment Operator

On-the-job Training Programs

This is one of the fastest ways to be a heavy equipment operator. On-the-job training programs take place within thejkssjsjsjsjssjsj normal work environment. You will have a chance to be in an environment where heavy equipment operators are. In most cases, there will be someone taking you through all the daily activities and teaching you what is expected of heavy equipment operators. To test what you have learned, you will have a chance to handle the heavy equipment. This is an excellent way to learn because there are hands-on practical experience and less theoretical work. Most programs also offer their trainees a job after training which is an added advantage.

Educational Program

Educational programs are the best if you want to learn the ins and outs of being a heavy equipment operator. The best program is either a construction management or a construction program where one receives heavy equipment training. These programs offer hands-on experience, and you get to learn a lot about different types of heavy equipment. This is vital because it makes it possible for you to work on various sites that utilize different types of heavy equipment. At the end of the program, you also get certified. This gives you a better chance of securing a job because you have proof of training.

Get a License

skskdkssskskkIn some states, you are not allowed to operate heavy machinery unless you have a license. Find out the national organization responsible for the certification and licensing of heavy equipment operators in your area and sign up. In most cases, it will take a period of 5 years to get licensed. This might seem like a long time, but it is worth it. Most employers require their employees to have a license to operate heavy equipment. Therefore, you will have the upper hand when applying for jobs.